ANALISIS TEGANGAN DAN FLEKSIBILITAS PIPA PADA AREA RUANG POMPA HIDRAN POLITEKNIK PERKAPALAN NEGERI SURABAYA DENGAN MENGGUNAKAN METODE ELEMEN HINGGA

Pekik Mahardhika, Adi Wirawan Husodo, Ni'matut Tamimah, Ekky Nur Budiyanto, Muhammad Ellang Naufal, Hafiz Akbar Alam

Abstract


Hydrant is a fire fighting system. In the process of distributing water in the hydrant fire extinguishing system using piping. The hydrant piping system is a very important piping line in fire prevention, so it must function properly without any problems. The hydrant piping system in this paper is a case of the yard hydrant piping system at the Politeknik Perkapalan Negeri Surabaya. The results of visual inspection on the hydrant piping show that the line pipe is damaged. The line pipe is located in the pump room area. According to DNV D101 that the piping system is a critical line. In this research, an analysis of the stress and flexibility of the pipe in the pump room area will be carried out. Piping around the pump to be analyzed from line numbers 01-101-A53-4” and 01-101-A53-3” to line numbers 02-101-A53-6”. The purpose of this research is to determine whether the line pipe around the hydrant pump is damaged due to stress and flexibility aspects. From the modeling and simulation results, it shows that from the aspect of stress that occurs in the pipe it still meets ASME B31.3 criteria, but from the aspect of flexibility it shows that the pipe is damaged due to displacement and rotation on line 01-102-A53-2".


Full Text:

PDF

References


A, V. V. V., Husodo, A. W., & Mahardhika, P. (2017). Analisa Tegangan dan Frekuensi Alami pada Pipa Line 116OTH202-200- 40C10 di Plant Fatty Acid Fractionation Upgrade. Proceedings Conference on Piping Engineering and Its Application, 2, 67–72. http://journal.ppns.ac.id/index.php/CPEAA/article/view/394

Aji, A. N. W., Priyonggo, P., & Budiyanto, E. N. (2018). Pengaruh Water Hammer Terhadap Pipa dan Check Valve Pada Discharge Pump TPL 1-PM-002C (Studi Kasus PT. Pertamina TBBM Tuban). Proceedings Conference on Piping Engineering and Its Application, 325–330. http://journal.ppns.ac.id/index.php/CPEAA/article/view/525

ASME. (2019). Boiler and Pressure Vessel Code Section II Part A. ASME Code.

Autopipe. (2008). Example Case System Water Hammer [Computer software]. Bentley.

Dinas Pemadam Kebakaran Banda Aceh. (2020). Dasar-Dasar Perencanaan Sistem Instalasi Hidran. https://damkar.bandaacehkota.go.id/2020/07/13/dasar-dasar-perencanaan-sistem-instalasi-hidran/

DNV. (2017). DNV GL D101 Structural analysis of piping systems.

Greer, B., Harper, C., Rahnama, R. (2012). Improved Thermal Piping Analysis for Reciprocating Compressor Piping Systems. BETA Machinery.

Husodo, A. W., Mahardhika, P., & A, V. V. V. (2019). Analisa Fleksibilitas Sistem Perpipaan Pada Fatty Acid Plant Akibat Pergeseran Posisi Evaporator. Jurnal Integrasi, 11 (2), 112–118. https://doi.org/10.30871/ji.v11i2.1663

Laras, M. B., Santoso, E., & Ariwiyono, N. (2018). Desain Ulang Sistem Perpipaan Distribusi Fluida Massecuite dari Reheater Menuju Feed Mixer. Proceeding 3rd Conference of Piping Engineering and Its Application, 31–36.

Mahardhika, P. (2017). Penentuan Allowable Span Antar Penyangga Pipa Slf Berdasarkan Tegangan, Defleksi, Frekuensi Alami. Jurnal IPTEK, 21(2), 27–34. https://doi.org/10.31284/j.iptek.2017.v21i2.149

Mahardhika, P., & Budiyanto, E. N. (2019). Analisa Pengaruh Water Hammer Terhadap Fleksibilitas Pipa. Simetris: Jurnal Teknik Mesin, Elektro Dan Ilmu Komputer, 10(2), 453–458. https://doi.org/10.24176/simet.v10i2.3039

Mahardhika, P., Julianto, E., Indartono, A., & Kusuma, G. E. (2018). Analisa Pengaruh Kenaikan Tekanan Fluida Terhadap Tegangan Dan Fleksibilitas Pipa Blowdown A106 Grade A Berdasarkan ASME B31.3. TEKNIK, 39 (1), 67–72. https://doi.org/10.14710/teknik.v39i1.17118

Mahardhika, P., Alam, H. A., Salsabilla, S. (2022). Evaluasi Tegangan Pada Jalur Perpipaan Air Gan Compressor Menurut ASME B31.3. Seminar Nasional Fakultas Teknik, 1.

Menteri Tenaga Kerja. (1999). Unit Penanggulangan Kebakaran di Tempat Kerja: Vol. KEP. MENAKER KEP. 186/MEN/1999.

Naufal, E. M., Mahardhika, P., Husodo, A. W. (2022). Perencanaan Inspeksi Pipa Hydrant Politeknik Perkapalan Negeri Surabaya. Proceeding 7th Conference of Piping Engineering and Its Application, 59–63.

Septiyani, A., Husodo, A. W., & Mahardhika, P. (2018). Analisa Dinamik pada Sistem Perpipaan akibat Getaran Pompa. Proceeding Conference of Piping Engineering and Its Application, 1, 73–78. http://journal.ppns.ac.id/index.php/CPEAA/article/view/537

Wu, X., Lu, H., Wu, S., Huang, K., Wan, J., Li, W., & Liu, Z. (2014). Stress analysis of reciprocating pump pipeline system in oil station. Journal of Chemical and Pharmaceutical Research.




DOI: https://doi.org/10.31884/jtt.v11i1.636

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 JTT (Jurnal Teknologi Terapan)

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

View Stats

 

 Creative Common Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)