EFEK GETARAN PADA PENGELASAN ALUMINUM 5083 H112 MENGGUNAKAN PROSES LAS GAS METAL ARC WELDING (GMAW) TERHADAP POROSITAS

Imam Khoirul Rohmat, Winarto Winarto

Abstract


5083 series aluminum magnesium is widely used for marine industrial. It is caused aluminum has high specific strength and good corrosion resistance. However, at process of welding many of porosity occured in the aluminum and it decrease the mechanical properties especially in HAZ (Heat Affected Zone). At casting process of aluminum, porosity could reduce by giving vibration. So, this method is tried to be applicated for welding of aluminum due to welding is a miniature of casting. Tensile test, hardness test, metallography test, and image analysis are technique to characterize the effect. As a result, vibration is not really affected the amount of porosity that occurred. But for hardness it is influenced especially for ER 4043 filler where the vibrated specimens have a higher hardness. The higher average result of tensile test for ER 5356 filler obtained at unvibrated specimens with the value is 231 MPa and for ER 4043 filler the higher average result obtained at vibrated specimen, the value is 226 MPa.

Full Text:

PDF

References


Kaufman, J.G. (2002). Aluminum Alloy Casting Properties, Processes, and Applications. New York: John Wiley & Sons, Inc.

Mathers, Gene. (2002). The welding of aluminium and its alloys. Cambridge England: Woodhead Publishing Limited.

Chirita, G., Stefanescu, I., Soares, D., Silva, F.S. (2009). Influence of vibration on the solidification behaviour and tensile properties of an Al–18 wt%Si alloy. Journal of Materials and Design, vol.30, 1575–1580.

Kocatepe, Kadir. (2007). Effect of low frequency vibration on porosity of LM25 and LM6 alloys. Journal of Materials and Design, vol.28, 1767–1775.

Limmaneevichitr, C., Pongananpanya, S., Kajornchaiyakul, J. (2009). Metallurgical structure of A356 aluminum alloy solidified under mechanical vibration: An investigation of alternative semi-solid casting routes. Journal of Materials and Design, vol.30, 3925–3930.

Taghavi, F., Saghafian, H., Kharrazi, Y.H.K. (2009). Study on the effect of prolonged mechanical vibration on the grain refinement and density of A356 aluminum alloy. Journal of Materials and Design, vol.30, 1604–1611.

Cueca, F., Patarroyo, A., Rojas, F., Solano, E.,. Morales, A., Muñoz, R. (2012). Study of the weld ability of Aluminum Alloy 5083 H116 with Pulsed Arc GMAW (GMAW-P). Cartagena (Colombia): Journal of Ship Science & Technology, vol.6, 43-56.

Romhanji, E., Popovic, M. (2003). Problems and Prospect of Al-Mg Alloys Application in Marine Constructions. Association of Metallurgical Engineers of Serbia: Journal of Metallurgy, 297-307.

Brůna M, and Sládek A. (2011). “Hydrogen Analysis and Effect ofFiltration on Final Quality of Castings from Aluminium AlloyAlSi7Mg0.3”. Archives of Foundry Engineering, vol.11, pp.5-1.

Ferreira P. J., Robertson I. M., and Birnbaum H. K. (1999). Hydrogen Effects on the Character of Dislocations in High-Purity Aluminum. Acta mater, vol.47, pp. 2991-2998.

Lu, G., Orlikowski, D., Park, I., Politano, O., and Kaxiras, E. (2002). Energetics of Hydrogen Impurities in Aluminum and Their Effect on Mechanical Properties. The American Physical Society, Physical Review B, vol. 65.

Kou, Sindo. (2003). Welding Metallurgy, Second Edition. Hoboken (New Jersey): John Wiley & Sons, Inc.

Kalenda, M., Madeleine, D.T. (2011). Corrosion Fatigue Behaviour of Aluminium 5083-H111 Welded Using Gas Metal Arc Welding Method. Shanghai, China: InThech.

ChakrabortyM., Vinod Kumar G.S. and Murty B.S. (2005). Poisoning and Fading Phenomena in the Grain Refinement of Al And its Alloys. Trans. Indian Inst. Met, vol.58 pp.661-670.

Liu Yuan, Ding Chao, Li Yan Xiang. Grain Refining Mechanism of Al-3B Master Alloy on Hypoeutectic Al-Si Alloys. Transactions of Nonferrous Metal Society of China, vol.21 pp.1435-1440.

Shahrooz , Nafisi. (2006). Effects of Grain Refining and Modification on the Microstructural Evolution of Semi-Solid 356 Alloy. Dissertation, University of Quebec at Chicoutimi.

Weite Wu. (2000). Influence of Vibration Frequency on Solidification of Weldments. Scripta Mater, vol.42, 661–665.




DOI: https://doi.org/10.31884/jtt.v4i2.126

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 JTT (Jurnal Teknologi Terapan)



View Stats

 

 Creative Common Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)